HP always offers printers of high quality. But in some cases the HP Printer’s black cartridge stops working, you can’t get the printouts properly now in these cases. Generally speaking, black printing stopped by HP printer is a common problem. We will first discuss the main reasons for this issue in this article and then give you the likely solutions. If they are used regularly and properly, HP printers are very reliable. If you always want uninterrupted service, you need to use generic ink cartridges for your HP printer.
There are so many reasons for this issue. From our research, we have found some probable causes for which your HP printer stops printing black. Let’s explain those:
Let ’s check out the most effective ways to fix the HP printer stopped printing black. Read and follow the instructions below:
This is the first method that we are going to explain and you have to follow these steps and check the ink levels. After that, you need to replace any empty or low cartridges.
In this step, follow these methods to check the ink levels and reverify with them once:
If none of the ink cartridges are low, then no need to replace them yet and once you are done, continue to the next solution. If any ink cartridges are low on ink, then you have to continue to the next step for replacing them.
Firstly, you have to load plain white paper in the input tray and now, press the Power button for turning on the printer.
Now, you have to remove the new cartridge from its packaging and hold the cartridge. Then insert the cartridge into its color-coded slot. After that, you have to make sure that the icon on the cartridge matches the icon on the slot and finally, you need to close the cartridge door.
Follow the steps below to align the cartridges and you have to make sure that the printer is turned on and paper is loaded in the paper tray.
Now, you have to lift the printer lid and then place the alignment page. After doing all the above pages, close the lid, and then hit the OK button to finish the alignment. Finally, you have to wait for scanning the alignment sheet and completes the entire alignment process.
If you are still getting the problem then you have to try this method and basically, you have to use an automated tool to clean the printhead.
Once you are done with the process, you should touch the Right Arrow button again to choose the Clean Printhead option, and then press OK. Finally, the printer starts the cleaning process and after cleaning your problem will be resolved.
So, in this way you can easily fix HP printer stopped printing black issue. Hope, you can easily understand the steps and still, if you are getting the problem then we suggest you opt for an expert for better support.